Description
Ductile iron strainer
Diameters from DN050 – 2″ to DN400 – 16″
Flanged PN25 according to EN1092-2 (ex DIN2533)
Lengths according to EN558-1 series 1 (ex DIN3202 F1)
Epoxy coating (min. 200μm)
Steel strainer in SS304 with round hole mesh
Hole diameter 1,5mm up to DN≤200, 2,0mm above
With threaded drain (from 1″ to 2″ depending on the sizes)
PN25
Free of CE marking for DN≤200 (cat. according to Art. 4.3 Dir. 2014/68/EU)
Working conditions
● Suitable for: water, 0°C to +110°C
below 0°C only for water with added antifreeze fluids
● Not suitable for: gases group 1 & 2, liquids group 1 (Dir. 2014/68/EU)
Downloads
Codes
895H
| VIR Code | Size mm - inches | Pcs per Carton | Unit weight (g) | Weight per carton (Kg) |
|---|---|---|---|---|
| F8951I050.2932 | 050 - 2" | 1 | 10000 | 10 |
| F8951I065.2932 | 065 - 2 1/2" | 1 | 15000 | 15 |
| F8951I080.2932 | 080 - 3" | 1 | 18000 | 18 |
| F8951I100.2932 | 100 - 4" | 1 | 26000 | 26 |
| F8951I125.2932 | 125 - 5" | 1 | 39000 | 39 |
| F8951I150.2932 | 150 - 6" | 1 | 50000 | 50 |
| F8951I200.2932 | 200 - 8" | 1 | 80000 | 80 |
| F8951I250.2932 | 250 - 10" | 1 | 130000 | 130 |
| F8951I300.2932 | 300 - 12" | 1 | 180000 | 180 |
| F8951I350.2932 | 350 - 14" | 1 | 285000 | 285 |
