Filtration - Fig. 895H

Fig. 895H

Ductile iron strainer
Diameters from DN050 - 2" to DN400 - 16"
Flanged PN25 according to EN1092-2 (ex DIN2533)
Lengths according to EN558-1 series 1 (ex DIN3202 F1)
Epoxy coating (min. 200μm)
Steel strainer in SS304 with round hole mesh
Hole diameter 1,5mm up to DN≤200, 2,0mm above
With threaded drain (from 1" to 2" depending on the sizes)

Free of CE marking for DN≤200 (cat. according to Art. 4.3 Dir. 2014/68/EU)

Working conditions
● Suitable for: water, 0°C to +110°C
   below 0°C only for water with added antifreeze fluids
● Not suitable for: gases group 1 & 2, liquids group 1 (Dir. 2014/68/EU)