Ball Valves for Actuators - Fig. 32TT/32TG

Fig. 32T

Three way brass ball valve with connection for actuator
Diameters from DN015 - ½" to DN050 - 2"
Threaded M/M/M for union ends (ISO228/1) up to DN≤32
(male threaded union ends kit according ISO 228/1 on request)
Threaded F/F/F (ISO228/1) for DN40 and DN50
Actuator connection according to ISO 5211 (F03/F05)
Air testing according to EN12266-1
Available in the following versions:
● 32TT, diverting valve with one input and two outputs
● 32TG, mixing valve with two inputs and one output
(also usable as distributing valve)
TR CU 010 compliant

Shell rating: PN40
Working conditions: Max 16Bar, Max differential pressure 3,5bar
Free of CE marking (cat. according to Art. 4.3 Dir. 2014/68/EU)

Working conditions:
● Suitable for: water, -15°C to +110°C
   below 0°C only for water with added antifreeze fluids
   over 100°C only for water with added anti-boiling fluids
   (Glycolic-Ethylene and glycolic-propylene mix. >20% and ≤50% may be used)
● Not suitable for: gases group 1 & 2, liquids group 1 (Dir. 2014/68/EU)